GD93 Midnight Specter Step-by-Step Guide

iOS app link:

Android app link:

To help you get started, we've prepared a straightforward setup guide for you to have a look at. Just follow these steps, and you'll be flying in no time:

1. Open the cover of the obstacle avoidance slot, slowly attach the obstacle avoidance sensor, and unfold the four arms of the GD93 Midnight Specter drone.
2. Place the drone on level ground.
3. Press the power switch for about 5 seconds until the drone turns on.
4. Turn on the remote control. The remote control will emit beeps. Wait for about 5 seconds before proceeding to the next step.
5. Press the Gyro calibration button for about 3 seconds. The controller will beep, indicating successful Gyro calibration.
6. Press the compass calibration button for 3 seconds. The controller will emit a beep, indicating that compass calibration has started.
7. Position the drone facing you, then rotate it slowly clockwise 3 times.
8. Position the drone vertically facing the sky and rotate it slowly clockwise 3 times. The remote controller will beep, indicating that compass calibration is successfully completed.
9. Step away 1 meter or more from the drone and wait for 3-5 minutes, allowing the drone to search for GPS signals. Once it beeps and the drone's remote control shows a GPS star count greater than 8, press the unlock button on the remote controller for 3 seconds or until the propeller starts spinning, indicating readiness for flight.

Connect to the WiFi:

1. Scan the QR code in the manual or download the "LW PRO" app from the Play Store or Apple Store.
2. After installing the app, turn off your mobile data and use Wi-Fi to connect your phone to the drone:
a. Go to Settings > Wi-Fi > locate the drone's name starting with "LW-PRO-GPS" on the available networks. If you're having trouble finding the name, could you try re-enabling your Wi-Fi?
b. After connecting your phone to the drone, open the " LW PRO " app. Agree to the "user agreement and privacy policy" and allow access to all permissions requested. Press "start" and wait for an image to display from the drone's camera.
3. Your drone application is ready when an image from the drone’s camera finally appears.
4. Now activate your drone’s propellers by moving your left throttle stick upward. Now your drone is ready for take-off.

If you have encountered an issue with the GD93 GPS Connectivity, please follow these steps carefully

1. Positioning the Drone: Start by placing the drone in a horizontal position with the camera facing towards you.
2. Powering On: Turn on the drone while it's resting on a flat surface.
3. Remote Controller: Next, turn on the remote controller.
4. Gyro Calibration: Press the gyro calibration button for 3 seconds, then wait a few seconds until you hear a beep indicating calibration has begun.
5. Geomagnetic Calibration: Press the geomagnetic button for 3 seconds. Begin calibrating horizontally by rotating your drone clockwise for 3 complete turns. Then, for vertical calibration, point the camera towards the ground and rotate it clockwise again for 3 complete turns.
6. Final Steps: Place the drone back on the ground and wait for 3 to 5 minutes. You should hear beeps or see satellite/star signals on the remote controller screen indicating GPS connection.

If, after 3 minutes, there's no beep or GPS signal displayed, please adjust the controls as follows: hold the left throttle stick to the upper topmost position of the controller and the right throttle stick to the bottom rightmost position.

Enjoy your flying experience with the GD93 Midnight Specter drone! If you have any questions or need any more help, please don't hesitate to contact our customer support team.